Oil filter 04152-38010
The oil filter with the part number **04152-38010** is typically used in certain Toyota and Lexus vehicles. Here are some key details about this oil filter:
- **Type:** Spin-on oil filter
- **Filter Media:** Usually made of paper or synthetic materials designed to trap contaminants and debris from the engine oil.
- **Compatibility:** Commonly compatible with various Toyota engines, but it's important to check specific vehicle models and engine types.
- **Dimensions:** Standard dimensions for a spin-on filter, but exact specifications can vary.
The oil filter with the part number **04152-38010** is typically used in certain Toyota and Lexus vehicles. Here are some key details about this oil filter:
- **Type:** Spin-on oil filter
- **Filter Media:** Usually made of paper or synthetic materials designed to trap contaminants and debris from the engine oil.
- **Compatibility:** Commonly compatible with various Toyota engines, but it's important to check specific vehicle models and engine types.
- **Dimensions:** Standard dimensions for a spin-on filter, but exact specifications can vary.
To use the oil filter 04352-38010, follow these steps for installation and maintenance:
### Installation Steps
1. **Gather Tools and Materials**
- New oil filter (04352-38010)
- Oil catch pan
- Filter wrench (optional)
- Clean cloth
- Engine oil (for priming)
2. **Preparation**
- Park the vehicle on a flat surface and turn off the engine. Allow it to cool down.
- Wear rubber gloves to protect your hands.
3. **Locate the Oil Filter**
- Identify the location of the oil filter on your engine. It’s typically found on the lower side or rear of the engine.
4. **Remove the Old Oil Filter**
- Place the oil catch pan underneath the filter to collect any dripping oil.
- Use the filter wrench to loosen the old filter by turning it counterclockwise.
- Once loose, unscrew it by hand and remove it completely. Dispose of it properly.
5. **Prepare the New Oil Filter**
- Take the new oil filter (04352-38010) and apply a small amount of fresh engine oil to the rubber O-ring on the top of the filter. This helps create a better seal and makes it easier to install.
6. **Install the New Oil Filter**
- Position the new filter in place and screw it on by hand, turning it clockwise.
- Tighten it until it’s snug. Avoid over-tightening, as this can damage the filter or the engine.
7. **Add Engine Oil**
- Check the owner’s manual for the correct oil capacity.
- Pour the new engine oil into the oil filler cap, ensuring not to overfill.
8. **Start the Engine**
- Start the engine and let it run for a few minutes.
- Check around the oil filter for any signs of leakage. If there are no leaks, you’re good to go.
9. **Clean Up**
- Dispose of the old oil filter and any used oil properly.
- Wipe any spills with a clean cloth.
Wei County Huachang Filter Manufacturing Co., Ltd. (for brand "0086") is a modern enterprise of filter R&D, production, sales and service, locate in China Auto Parts Manufacturing Base - Hebei Wei County.
QUICK LINKS
Products
If you have any question,please contact us.
Fax: +86-20-3676 0028
Tel: +86-20-3626 9868
Mob: +86-186 6608 3597
QQ: 2355317461
E-mail: 2355317461@jffilters.com