Oil Filter Making by Huachang Filter

Product details of the oil filter making

Product Overview

Huachang Filter oil filter making is manufactured from the best quality material. The inspection of the product is paid 100% attention. From the materials to the finished products, each step of inspection is strictly conducted and followed. oil filter making can be applied to different industries, fields and scenes. By treating employees with mutual respect, Huachang Filter staff always provide the best service for customers.

Product Information

Huachang Filter's high-quality oil filter making is produced according to the national standards. The specific details are as follows.

To use the oil filter 04352-38010, follow these steps for installation and maintenance:

### Installation Steps

1. **Gather Tools and Materials**

   - New oil filter (04352-38010)

   - Oil catch pan

   - Filter wrench (optional)

   - Clean cloth

   - Engine oil (for priming)

2. **Preparation**

   - Park the vehicle on a flat surface and turn off the engine. Allow it to cool down.

   - Wear rubber gloves to protect your hands.

3. **Locate the Oil Filter**

   - Identify the location of the oil filter on your engine. It’s typically found on the lower side or rear of the engine.

4. **Remove the Old Oil Filter**

   - Place the oil catch pan underneath the filter to collect any dripping oil.

   - Use the filter wrench to loosen the old filter by turning it counterclockwise.

   - Once loose, unscrew it by hand and remove it completely. Dispose of it properly.

5. **Prepare the New Oil Filter**

   - Take the new oil filter (04352-38010) and apply a small amount of fresh engine oil to the rubber O-ring on the top of the filter. This helps create a better seal and makes it easier to install.

6. **Install the New Oil Filter**

   - Position the new filter in place and screw it on by hand, turning it clockwise.

   - Tighten it until it’s snug. Avoid over-tightening, as this can damage the filter or the engine.

7. **Add Engine Oil**

   - Check the owner’s manual for the correct oil capacity.

   - Pour the new engine oil into the oil filler cap, ensuring not to overfill.

8. **Start the Engine**

   - Start the engine and let it run for a few minutes.

   - Check around the oil filter for any signs of leakage. If there are no leaks, you’re good to go.

9. **Clean Up**

   - Dispose of the old oil filter and any used oil properly.

   - Wipe any spills with a clean cloth.

Company Introduction

Hebei Huachang Filter Manufacturing Co.,Ltd. stands out among other manufacturers in the oil filter making industry. The professional excellent talents unite a powerful and creative team of design in Hebei Huachang Filter Manufacturing Co.,Ltd.. Our commitment to quality ensures higher customer satisfaction and a more quality-conscious, services-minded organization. Inquire now!
We always insist on the production of high-quality products. Welcome customers with needs to negotiate with us!