Oil Filter
Huachang Filter Has 10 years of car filters industry experience and technical reserves.
Language
Huachang Filter Has 10 years of car filters industry experience and technical reserves.
The oil filter with the part number **04152-38010** is typically used in certain Toyota and Lexus vehicles. Here are some key details about this oil filter:
- **Type:** Spin-on oil filter
- **Filter Media:** Usually made of paper or synthetic materials designed to trap contaminants and debris from the engine oil.
- **Compatibility:** Commonly compatible with various Toyota engines, but it's important to check specific vehicle models and engine types.
- **Dimensions:** Standard dimensions for a spin-on filter, but exact specifications can vary.
The oil filter with the part number **04152-38010** is typically used in certain Toyota and Lexus vehicles. Here are some key details about this oil filter:
- **Type:** Spin-on oil filter
- **Filter Media:** Usually made of paper or synthetic materials designed to trap contaminants and debris from the engine oil.
- **Compatibility:** Commonly compatible with various Toyota engines, but it's important to check specific vehicle models and engine types.
- **Dimensions:** Standard dimensions for a spin-on filter, but exact specifications can vary.
To use the oil filter 04352-38010, follow these steps for installation and maintenance:
### Installation Steps
1. **Gather Tools and Materials**
- New oil filter (04352-38010)
- Oil catch pan
- Filter wrench (optional)
- Clean cloth
- Engine oil (for priming)
2. **Preparation**
- Park the vehicle on a flat surface and turn off the engine. Allow it to cool down.
- Wear rubber gloves to protect your hands.
3. **Locate the Oil Filter**
- Identify the location of the oil filter on your engine. It’s typically found on the lower side or rear of the engine.
4. **Remove the Old Oil Filter**
- Place the oil catch pan underneath the filter to collect any dripping oil.
- Use the filter wrench to loosen the old filter by turning it counterclockwise.
- Once loose, unscrew it by hand and remove it completely. Dispose of it properly.
5. **Prepare the New Oil Filter**
- Take the new oil filter (04352-38010) and apply a small amount of fresh engine oil to the rubber O-ring on the top of the filter. This helps create a better seal and makes it easier to install.
6. **Install the New Oil Filter**
- Position the new filter in place and screw it on by hand, turning it clockwise.
- Tighten it until it’s snug. Avoid over-tightening, as this can damage the filter or the engine.
7. **Add Engine Oil**
- Check the owner’s manual for the correct oil capacity.
- Pour the new engine oil into the oil filler cap, ensuring not to overfill.
8. **Start the Engine**
- Start the engine and let it run for a few minutes.
- Check around the oil filter for any signs of leakage. If there are no leaks, you’re good to go.
9. **Clean Up**
- Dispose of the old oil filter and any used oil properly.
- Wipe any spills with a clean cloth.
LEAVE A MESSAGE
We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information.
Recommended
WEIXIAN HUACHANG AUTO PARTS MANUFACTURING CO.,LTD. (for brand "0086") is a modern enterprise of filter R&D, production, sales and service, locate in China Auto Parts Manufacturing Base - Hebei Wei County.
